Chevette...
I have been involved in building and competing with Vauxhall chevettes since 1976. During this time I have built a large number of chevettes to group 4 and group B specification following closely the orginal cars but improving parts where ever possible. Several of the cars that I have built recently are being used for the historic rally championship.
I have also built chevettes fitted with the 3 litre v6 Vauxhall omega engine which has been fitted with our own 6 throttle body injection system and mbe ecu. In this form the standard engine produces 260 bhp and 215 ft lb of torque.
The cars that I build are always fitted with either a bolt in or welded in rollcage that we have designed and manufactured. The rear of the car would be fitted with a 5 link axle location and modified transmission and exhaust tunnel. Larger rear shock absorber turrets are fitted to accept coil over shocks if required. The rear wheel tubs are replaced to accept wheels up to 8x18
The front cross member is moved forward as per the works cars to increase the wheel base and improve wheel clearance.
Both Salisbury and atlas axles are homolgated for the car and we can manufacture the axle to the customers requirements. The axles are normally supplied with thick tubes and fully floating hubs.
A price list of all the parts that we manufacture and supply is attached.
Click Here For Price List
